Hierarchical Coherent Phonons in a Superatomic Semiconductor

The coupling of phonons to electrons and other phonons plays a defining role in material properties, such as charge and energy transport, light emission, and superconductivity. In atomic solids, phonons are delocalized over the 3D lattice, in contrast to molecular solids where localized vibrations dominate. Here, a hierarchical semiconductor that expands the phonon space by combining localized 0D modes with delocalized 2D and 3D modes is described. This material consists of superatomic building blocks (Re₆Se₈) covalently linked into 2D sheets that are stacked into a layered van der Waals lattice. Using transient reflectance spectroscopy, three types of coherent phonons are identified: localized 0D breathing modes of isolated superatom, 2D synchronized twisting of superatoms in layers, and 3D acoustic interlayer deformation. These phonons are coupled to the electronic degrees of freedom to varying extents. The presence of local phonon modes in an extended crystal opens the door to controlling material properties from hierarchical phonon engineering.     

挥发性有机废气净化技术研究进展

受现代工业的快速发展影响,挥发性有机废气对环境的影响不断提升。基于此,本文将简单分析挥发性有机废气净化技术研究现状,并深入探讨相关研究进展,希望研究内容能够给挥发性有机废气净化技术的选择提供依据。     

Heat propagation in thermally conductive polymers of PA6 and hexagonal boron nitride

Thermally conductive polymers offer new possibilities for the heat dissipation in electric and electronic components, for example, by a three‐dimensional shaping of the heat sinks. To face safety regulations, improved fire performance of those components is required. In contrast to unfilled polymers, those materials exhibit an entirely different thermal behavior. To investigate the flammability, a phosphorus flame retardant was incorporated into thermally conductive composites of polyamide 6 and hexagonal boron nitride. The flame retardant decreased the thermal conductivity only slightly. However, the burning behavior changed significantly, due to a different heat propagation, which was investigated using a thermographic camera. An optimum content of hexagonal boron nitride for a sufficient thermal conductivity and fire performance was found between 20 and 30 vol%. The improvement of the fire performance was due to a faster heat release out of the pyrolysis zone and an earlier decomposition of the flame retardant. For higher contents of hexagonal boron nitride, the heat was spread faster within the part, promoting an earlier ignition and increasing the decomposition rate of the flame retardant.     

Effects of water molecules on the formation of transfer films and the occurrence of superlow friction

The establishment of superlow friction in moist air is very important for the engineering application of hydrogenated diamond-like carbon (H-DLC) films. Nevertheless, water molecules in the surrounding atmosphere always result in the failure of the near-frictionless state. This work aims to explore the effects of water molecules in the environment and the material of the counterparts on the tribological performance of a composite structure prepared by depositing MoS₂ on a H-DLC film. The results indicated that the existence of water molecules in the atmosphere is beneficial for achieving stable superlubricity for the material system because it helps retain the in-situ formed MoS₂ transfer film on the counterpart. In the presence of water molecules, the wear interface was replaced by a robust and incommensurate MoS₂ tribolayer/H-DLC sliding interface, which was responsible for the superlow friction achieved in this work. The results also revealed that the ZrO₂ counterpart was capable of retaining the as-formed MoS₂ transfer film and establishing long-lasting superlow friction even in dry air. The mechanisms behind this phenomenon are also discussed in this paper.     

基于高频损耗比的干式空心电抗器制造缺陷检测方法及应用探讨

本文通过分析电抗器因制造工艺导致少匝和极限工艺偏差时600Hz损耗,提出高频损耗可作为电抗器制造缺陷的检测手段及其适用范围,并以600Hz的实测损耗与理论损耗之比是否超过1.5作为判据,以同组任两台损耗之比是否超过1.5作为辅助判据,同时列举应用实例.     

Preparation and electrochemical characterization of Ti-based amorphous metallic glass with high strength

Ti-based amorphous metallic glasses have excellent mechanical, physical, and chemical properties, which is an important development direction and research hotspot of metal composite reinforcement. As a stable, simple, efficient, and large-scale preparation technology of metallic powders, the gas atomization process provides an effective way of preparing amorphous metallic glasses. In this study, the controllable fabrication of a Ti-based amorphous powder, with high efficiency, has been realized by using gas atomization. The scanning electron microscope, energy-dispersive spectrometer, and X-ray diffraction are used to analyze surface morphology, element distribution, and phase structure, respectively. A microhardness tester is used to measure the mechanical property. An electrochemical workstation is used to characterize corrosion behavior. The results show that as-prepared microparticles are more uniform and exhibit good amorphous characteristics. The mechanical test shows that the hardness of amorphous powder is significantly increased as compared with that before preparation, which has the prospect of being an important part of engineering reinforced materials. Further electrochemical measurement shows that the corrosion resistance of the as-prepared sample is also significantly improved. This study has laid a solid foundation for expanding applications of Ti-based metallic glasses, especially in heavy-duty and corrosive domains.     

Room-temperature multiferroic characteristics and unique vortex domain structures of h-Yb1−xInxFeO3 solid solutions

Hexagonal rare-earth ferrites (h-RFeO₃) have attracted much scientific attention due to their room-temperature multiferroicity. However, it is still a hard job to obtain h-RFeO₃ bulk materials because of the meta-stability of such hexagonal phase, and the evaluation of room-temperature ferroelectric and magnetoelectric characteristics in such materials is also a challengeable issue. In the present work, Yb_1−xIn_xFeO₃ ceramics with the stable hexagonal structure were obtained by introducing chemical pressure, where the unique ferroelectric domain structures of sixfold vortex combined with tenfold vortex with a typical size of ~400 nm were determined. Symmetry of the present system evolved from centrosymmetric orthorhombic Pbnm (x = 0–0.4) to non-centrosymmetric hexagonal P6₃cm (x = 0.5 and 0.6) with a ferroelectric polarization up to 3.2 μC/cm², and finally to centrosymmetric hexagonal P6₃/mmc (x = 0.7 and 0.8). The Curie point decreased monotonically from 723 K to a temperature below room temperature with increasing x, and the antiferromagnetic phase transition above room temperature was determined for all compositions. Meanwhile, a large linear magnetoelectric coefficient (α_ME) up to 0.96 mV/cm Oe was obtained at room temperature, and this indicated the great application potential for magnetoelectric devices.     

Visual Detection of Adenosine Triphosphate by Taylor Rising: A Simple Point-of-Care Testing Method Based on Rolling Circle Amplification

Rapid and sensitive point-of-care testing (POCT) is an extremely critical mission in practical applications, especially for rigorous military medicine, home health care, and in the third world. Here, we report a visual POCT method for adenosine triphosphate (ATP) detection based on Taylor rising in the corner of quadratic geometries between two rod surfaces. We discuss the principle of Taylor rising, demonstrating that it is significantly influenced by contact angle, surface tension, and density of the sample, which are controlled by ATP-dependent rolling circle amplification (RCA). In the presence of ATP, RCA reaction effectively suppresses Taylor-rising behavior, due to the increased contact angle, density, and decreased surface tension. Without addition of ATP, untriggered RCA reaction is favorable for Taylor rising, resulting in a significant height. With this proposed method, visual sensitive detection of ATP without the aid of other instruments is realized with only a 5 μL droplet, which has good selectivity and a low detection limit (17 nM). Importantly, this visual method provides a promising POCT tool for user-friendly molecular diagnostics.     

基于多核处理器的声光复合一体化探测系统设计

介绍一种以多核处理器AM5728为核心处理器的声光复合探测系统,结合现场可编程逻辑门阵列(Field Programmable Gate Array,FPGA)处理器实现对音视频数据采集、信号处理、目标识别及跟踪定位的功能,详细阐述了基于多核处理器的高集成度系统设计方案.实验结果证明,通过一体化设计,该系统将传统声光探测系统融合为一体,既提升了系统探测效能,又提升了系统应用的便携性.     

异丙醇的生产工艺及应用

异丙醇是一种应用广泛的有机溶剂和化工原料,介绍了合成异丙醇生产技术路线,综合比较了丙酮加氢路线和丙烯水合路线的经济性,并分析了异丙醇的应用前景。丙酮加氢制异丙醇路线更具有经济性,异丙醇应用领域需进一步拓展。